Full Features

Element FAQs.

Is the water Element uses clean?

Yes! It is the same clean water used for your sink and shower. Fresh water is accessed using a T-Valve that brings it directly to your Element for a perfectly fresh wash.

Will this fit my toilet?

Element is designed to fit most US toilets, both round and elongated including most one-piece and curved toilet fixtures. To be sure, measure the distance between the bolt holes. The space must be between 5¼ inches and 8 inches. Then measure the distance from the center of the bolt holes to the toilet tank to ensure proper clearance. There must be at least ¾ inch of clearance. If you meet those measurement requirements then you're good to go!

How do I dry off?

After you’re done washing, simply pat dry with a few squares of toilet paper or a bidet towel to finish the job.

Do I need an outlet to use Element?

Nope! No electrical outlet required. Element is mechanically powered, using the water pressure in your pipes to operate. Even low water pressure homes can use Element.

Do the nozzles “get in the way”?

Element’s nozzles are retracted and covered so you won’t contaminate them when not in use. Plus, we built in a self-cleaning system so the nozzles are rinsed before each use.

How far does the arm stick out from the toilet?

The control arm extends out to the right side of the toilet approximately 4 inches. This can vary depending on your toilet since the brackets are adjustable, but 4 inches is average.

How can I clean my bidet?

All of our bidets can be cleaned with a soft cloth and standard mild cleaning detergents. Since Element is so easy to install, it's easy to completely remove if you ever want to deep clean your toilet.

Is white the only color offered?

Yes, currently white is the only color we offer for our bidet attachments with no plan on offering alternate colors in the near future.

Do you make a left-handed Element?

No, we do not offer a left-handed product at this time.